Printer connection To connect your printer turn off the printer and the NFA and connect the
Step 1. Power on the NFA and the printer.
Step 2. Press the
Step 3. Press
Performing System Operations
Configuring a Printer
Configuring a Printer
printer to the parallel I/O interface connector of the NFA using an
IEEE 1284 compliant parallel printer cable.
If appropriate, configure your printer (see your printer documentation
for more details on configuring your printer).
To Configure a Printer
Print Setup
to the analyzer online help or User's Guide for a description of the
options.
to access the
Printer Type
make the NFA attempt to identify the connected printer.
The printer should now be automatically recognised by the NFA. If the
printer is not automatically recognised, then see the User's Guide for
more details on printer setup.
Testing Correct Printer Operation
When printer setup is complete test correct printer operation by pressing
,
Print Setup
Print (Screen)
page.
72
key and then press the
Printer Type
and then pressing the
menu key. Refer
Printer Type
menu keys and press
key to print a test
Print
Chapter 4
to
Auto