Agilent Technologies ESA-E Series Programmer's Manual page 216

Language Reference
HCOPy Subsystem
HCOPy Subsyste m
The HCOPy subsystem controls the setup of plotting and printing to a n
external device.
Abort the Print
HCOPy :ASORt
Aborts hard copy printout of results .
Front Pane l
Access : ESC (with print in progress)
Printer Typ e
:
HCOPy : DEVice : TYPE AUTO CUSTom NONE
HCOPy : DEVice : TYPE?
Sets up the printer by selecting printer type .
AUTO - the instrument queries the printer to determine the printe r
type and automatically sets itself for that printe r
CUSTom - allows you to select a custom printer if your printer
cannot be auto-configure d
NONE - tells the instrument that the hardcopy output device is not a
printer
Factory Prese t
and *RST: The factory default is AUTO . This parameter is
persistent, which means that it retains the setting
previously selected, even through a power cycle .
Front Panel
Access:
Print Setup, Printer Type
Color Hard Copy
:HCOPy :IMAGe :COLor[ :STATe] OFFIONIOI 1
HCOPy :IMAGe :COLor[ :STATe] ?
Selects between color and monochrome mode for hardcopy output .
Factory Prese t
and *RST: The factory default is On . This parameter is persistent ,
which means that it retains the setting previously
selected, even through a power cycle .
5-56 Chapter 5