Agilent Technologies ESA-E Series Programmer's Manual page 230

Language Reference
MMEMory Subsystem
MMEMory Subsystem
The purpose of the MMEMory subsystem is to provide access to mas s
storage devices such as internal or external disk drives .
NOTE Refer also to : CALCulate and :
TRACe
subsystems for more trace and
limit line commands.
Agilent ESA analyzers use two types of mass storage devices :
• 3.5 inch disk drive (high density, 1 .44 MBytes formatted) designated
"A:"
• Part of flash memory and treated as a device designated "C:"
The MMEMory command syntax term <f ile_name> is a specifier
having the form : drive:name.ext, where the following rules apply :
• "drive" is "A:" or "C:"
• "name" is a DOS file name of up to eight characters, letters (A-Z, a-z )
and numbers (0-9) only (lower case letters are read as uppercase )
• "ext" is an optional file extension using the same rules as "name,"
but consists of up to three characters total
Catalog the Selected Memory Locatio n
:MMOlory :CATalog? <drive>
where "drive" is "A :" or "C :"
Lists all files in the specified drive. The return data will be of th e
format : <mem used>,<mem free> {,<file_listing> }
Each <file listing> indicates the name, and size of one file in th e
directory list : <file_name>,<file size>
Example :
Catalog drive C :, which is in instrument memory :
:MMEMory :CATalog? "C : "
Front Panel
Access : File
Copy a File
:MMEMory :COPY <file namel>,<file name2 >
To copy a file, the source file name is <file_namel> and the destination
file name is <file_name2> .
Example :
: MMEM : COP Y
"C :oldname .sta","A :\newname .sta "
5-70 Chapters