Agilent Technologies ESA-E Series Programmer's Manual page 287

Language Reference
SOURce Subsystem
ESA E4405B : 0 dB to 56 dB in 8 dB step s
ESA E4407B, E4408B : 0 dB to 56 dB in 8 dB step s
Default Unit: dB
Front Panel
Access:
Source, Attenuation Auto Ma n
Automatic Source Attenuation
:SOURce :POWer :ATTenuation :AUTO OFFION101 1
SOURce :POWer :ATTenuation :AUTO?
Selects if the source output level attenuator will be set automatically.
Factory Preset
and *RST: On
Front Panel
Access :
Source, Attenuation Auto Ma n
Sets the Output Powe r
:SOURce : POWer[ :LEVel1[ :Iletediate][ :AMPLitude] <ampl>
:SOURce : POWer[ :LEVe1][ :IMMediate][ :AMPLitude] ?
Specifies the source output power level . Use : SOURce : POWer : SWEep to
set the change in power level across the sweep . Also see
: SOURce : POWer : STARt and OUTPut [ : STATe 1 .
Factory Prese t
and *RST:
Range :
-10dBm
ESA E4401B, E4411B : -70 dBm to 3 dBm
ESA E4402B, E4403B : -66 dBm to 3 dBm
ESA E4404B : -66 dBm to 3 dBm
ESA E4405B : -66 dBm to 3 dBm
ESA E4407B, E4408B : -66 dBm to 3 dBm
Default Unit:
Front Panel
Access :
dBm
Source, Amplitude On Of f
Sets the Source Output Power Mod e
SOURce :POWer :MODE FIXedISWEep
SOURce :POWer :MODE ?
Chapter 5 5-127