Agilent Technologies ESA-E Series Programmer's Manual page 162

Language Reference
The first few pages of this chapter contain common commands specifie d
in IEEE Standard 488 .2-1992, IEEE Standard Codes, Formats,
Protocols
and Common Commands for Use with ANSI /IEEE Std
488 .1-1987.
New York, NY11992 . Following these commands, the
Agilent ESA spectrum analyzers SCPI commands are listed .
NOTE Refer to Chapter 2 , "Status Registers" and the status messages i n
Chapter 7, "Error Messages" which supplements the information
presented in this chapter. In addition, refer to Chapter 6, "Front-Pane l
Key Reference," in the Agilent ESA Spectrum Analyzers User's Guide
for additional information about the operation of each analyzer
function . Use the analyzer
HELP
key to obtain similar informatio n
about analyzer key functions .
Refer to Chapter 6, "Agilent 8590/ESA Spectrum Analyzer s
Programming Conversion Guide" for specific backwards compatibilit y
information between commands for HP/Agilent 8590-Series spectru m
analyzers and Agilent ESA analyzers.
5-2 Chapters