Agilent Technologies ESA-E Series Programmer's Manual page 195

Language Reference
CALCuIate :MARKer Subsectio n
:CALCulate :MARKer[1]I21314 :X :POSition :STARt ?
Position the left-most marker, the start (reference) frequency of th e
designated band-type marker pair, at the specified trace X position . A
trace is composed of 8192 points (X positions) when in non-zero span .
Use : CALCulate : MARKer :MODE BAND to select band markers .
The query returns the current X-position start/reference frequency o f
the designated marker.
Range : 0 to 8191, (2 to 8192 in zero span for analyzers wit h
firmware revision A.05.00 and later)
Front Panel
Access :
Marker, <active marker>, Start
Band Markers Stop Frequency X Position
:CALCulate :MARKer[1112,314a
:POSition
:BTOP <param>
:CALCulate :MARKer[1fl21314 :B:POSition :STOP?
Position the right-most marker, the stop frequency of the designated
band-type marker pair, at the specified trace X position . A trace is
composed of 8192 points (X positions) when in non-zero span . Use
: CALCulate : MARKer :MODE BAND to select band markers .
The query returns the current X-position stop frequency of the
designated marker.
Range : 0 to 8191, (2 to 8192 in zero span for analyzers with
firmware revision A.05.00 and later )
Front Panel
Access :
Marker, <active marker>, Sto p
Marker X-Axis Readout
:CALCulate :MARKer[1]121314 :x:READout
FREQuencyITIME1ITIMelPERiod
:CALCulate :MARKer[1]121314 :X:READout ?
Selects the units for the x-axis readout of the marker . Available units
are:
Frequency
Tim e
Inverse of time
Period
Factory Preset
and *RST :
Frequency
Front Panel
Chapter 5 5-35