Agilent Technologies ESA-E Series Programmer's Manual page 217

Language Referenc e
HCOPy Subsyste m
Front Panel
Access :
Print Setup, Color On Off
Print a Hard Copy
:
HCOPy [ : XMMediate]
The entire screen is output to the parallel port.
Front Panel
Access: Print
Form Feed the Print Item
HCOPy :ITEM : FFEed[ :IMMiediate ]
Sends the printer a command to form feed .
Front Panel
Access : Print Setup, Eject Page
Page Orientatio n
HCOPy :PAGE :ORIentation LANDscapeIPORTrai t
HCOPy :PAGE :ORientation?
Specifies the orientation of the print .
NOTE Landscape mode is not presently supported for PCL-3 printers .
Factory Preset
and *RST: The factory default is Landscape . This parameter i s
persistent, which means that it retains the settin g
previously selected, even through a power cycle .
Front Panel
Access : Print Setup, Orientation, Landscap e
Print Setup, Orientation, Portrai t
Number of Items Printed on a Pag e
:
HCOPy : PAGE : PRINts <integer>
: HCOPy : PAGE : PRINts ?
Sets the number of display print outputs sent to print on one piece o f
paper, before a form feed is sent .
Chapter 5 5-57