Language Reference
ABORt Subsystem
ABORt Subsystem
Abort
:ABORt
Restarts any sweep or measurement in progress and resets the swee p
or trigger system . A measurement refers to any of the measurement s
found in the MEASURE menu .
If : INITiate : CONTinuous is off (single measure), then
: INITiate : IMMediate will start a new single measurement .
If : INITiate : CONTinuous is on (continuous measure), a ne w
continuous measurement begins immediately.
The INITiate and TRIGger subsystems contain additional relate d
commands.
Front Panel
Access:
Restart for continuous measurement mode
5-10
Chapter 5