Agilent Technologies ESA-E Series Programmer's Manual page 301

Language Referenc e
STATus :QUEStionable Subsection
NOTE
The register requires that the equivalent PTR or NTR filters be se t
before a condition register bit can set a bit in the event register .
The data in this register is latched until it is queried . Once queried, the
data is cleared.
Questionable Power Negative Transitio n
STATus :QUEStionable :POWer :NTRansition <number>
STATus :QUEStionable :POWer :NTRansition ?
This command determines which bits in the Questionable Powe r
Condition register will set the corresponding bit in the Questionable
Power Event register when that bit has a negative transition (1 to 0) .
The variable <number> is the sum of the decimal values of the bits tha t
you want to enable.
Factory Prese t
and *RST: 0
Range : 0 to 3276 7
Questionable Power Positive Transitio n
STATus :QUEStionable :POWer :PTRansition <number>
STATus :QUEStionable :POWer :PTRansition?
This command determines which bits in the Questionable Powe r
Condition register will set the corresponding bit in the Questionable
Power Event register when that bit has a positive transition (0 to 1) .
The variable <number> is the sum of the decimal values of the bits tha t
you want to enable .
Factory Preset
and *RST:
32767 (all 1's)
Range : 0 to 3276 7
Questionable Positive Transition
STATus :QUEStionable :PTRansition <number >
STATus :QUEStionable :PTRansition ?
This command determines which bits in the Questionable Conditio n
register will set the corresponding bit in the Questionable Even t
register when that bit has a positive transition (0 to 1) . The variabl e
<number> is the sum of the decimal values of the bits that you want t o
enable .
Chapter 5 5-141