Agilent Technologies ESA-E Series Programmer's Manual page 234

Language Referenc e
MMEMory Subsystem
Store a Limit Line in a Fil e
MMEM1ory :STORe :LIMit LLINE1ILLINE2,<file name>
Stores the specified limit line to the specified file in memory .
Example : :MMEM :STOR :LIM LLINE2,"C :mylimit .lim "
Remarks: This command will fail if the <file_name> already
exists. There is no SCPI short form for parameters
LLINE] . ~ LLINE2 .
Front Panel
Access :
File, Save, Type, Limit s
Store a Screen Image in a Graphic Fil e
M Mory :STORe :SCReen <file name>
Saves the current instrument screen image, as a graphic file, to th e
specified file in memory. The file must have a .gif or .wmf file extension .
The specified file extension determines which file format th e
instrument will use to save the image.
Example : :MMEM : STOR : SCR "C : myscreen . gif "
Remarks : This command will fail if the <f ile_name> already
exists.
Front Panel
Access :
File, Save, Type, Screen
Store an Instrument State in a File
MMEMory :STORe :STATe 1,<file name>
Saves the instrument state to the file in memory.
Example :
:MMEM :STOR :STAT 1,"C :mystate .sta "
Remarks: This command will fail if the <f ile_name> already
exists.
Store a Trace in a Fil e
MMEMory :STORe :TRACe <label>,<file name >
Saves the specified trace to a file in memory. The file name must have a
file extension of .trc or .csv. The file extension determines whether a
trace is stored, or a trace with its state, are stored . The .csv extension is
for trace files using the CSV (comma-separated values) format . The .trc
extension is for files that include both trace and state data .
Example :
:MMEM :STOR :TRAC TRACE3, "C :mytrace .trc "
Range: Trace labels are : TRACE1 l TRACE2
I
TRACE3
I
ALL
5-74 Chapter 5