Agilent Technologies ESA-E Series Programmer's Manual page 294

Language Reference
STATus :QUEStionable Subsectio n
Questionable Calibration Negative Transitio n
STATus :QUEStionable :CALibration :NTRansition <number >
STATus :QUEStionable :CALibration :NTRansition ?
This command determines which bits in the Questionable Calibratio n
Condition register will set the corresponding bit in the Questionabl e
Calibration Event register when that bit has a negative transition (1 t o
0). The variable <number> is the sum of the decimal values of the bit s
that you want to enable.
Factory Preset
and *RST: 0
Range : 0 to 32767
Questionable Calibration Positive Transition
STATus :QUEStionable :CALibration :PTRansition <number >
STATus :QUEStionable :CALibration :PTRansition ?
This command determines which bits in the Questionable Calibratio n
Condition register will set the corresponding bit in the Questionabl e
Calibration Event register when that bit has a positive transition (0 t o
1). The variable <number> is the sum of the decimal values of the bit s
that you want to enable .
Factory Prese t
and *RST: 32767 (all 1's)
Range : 0 to 32767
Questionable Condition
STATus :QUEStionable :CONDition?
This query returns the decimal value of the sum of the bits in th e
Questionable Condition register.
NOTE The data in this register is continuously updated and reflects the
current conditions .
5-134
Chapter 5