Agilent Technologies ESA-E Series Programmer's Manual page 4

0
The instruction documentation symbol . The product i s
marked with this symbol when it is necessary for the
user to refer to the instructions in the documentation .
This symbol is used to mark the on position of th e
power line switch .
U
This symbol is used to mark the standby position of the
power line switch .
This symbol indicates that the input power required i s
AC.
WARNING
This is a Safety Class 1 Product (provided with a protectiv e
earthing ground incorporated in the power cord) . The main s
plug shall only be inserted in a socket outlet provided with a
protected earth contact . Any interruption of the protectiv e
conductor inside or outside of the product is likely to make th e
product dangerous. Intentional interruption is prohibited.
WARNING
If this product is not used as specified, the protection provide d
by the equipment could be impaired . This product must be used
in a normal condition (in which all means for protection are
intact) only.
i
ti
iii