Agilent Technologies ESA-E Series Programmer's Manual page 298

Language Reference
STATus:QUEStionable Subsection
Questionable Integrity Negative Transition
STATus :QUEStionable :INTegrity :NTRansition <number>
STATus :QUEStionable :INTegrity :NTRansition ?
This command determines which bits in the Questionable Integrity
Condition register will set the corresponding bit in the Questionabl e
Integrity Event register when that bit has a negative transition (1 to 0) .
The variable <number> is the sum of the decimal values of the bits tha t
you want to enable .
Factory Preset
and *RST: 0
Range : 0 to 3276 7
Questionable Integrity Positive Transition
STATus :QUEStionable :INTegrity :PTRansition <number >
STATus :QUEStionable :INTegrity :PTRansition ?
This command determines which bits in the Questionable Integrity
Condition register will set the corresponding bit in the Questionable
Integrity Event register when that bit has a positive transition (0 to 1) .
The variable <number> is the sum of the decimal values of the bits that
you want to enable .
Factory Prese t
and *RST: 32767 (all 1's)
Range : 0 to 3276 7
Questionable Integrity Uncalibrated Enabl e
STATus :QUEStionable:INTegrity :UNCalibrated :ENABle
STATus :QUEStionable:INTegrity :UNCalibrated :ENABle ?
This command determines which bits in the Questionable Integrity
Uncalibrated Condition Register will set bits in the Questionabl e
Integrity Uncalibrated Event register, which also sets the Dat a
Uncalibrated Summary bit (bit 3) in the Questionable Integrit y
Register. The variable <number> is the sum of the decimal values of th e
bits you want to enable .
Factory Prese t
and *RST: 32767 (all 1's)
Range : 0 to 32767
5-138 Chapter 5