Agilent Technologies ESA-E Series Programmer's Manual page 232

Language Reference
MMEMory Subsyste m
Loads a limit line, from the specified file in mass storage to the
instrument. Loading a time limit line deletes any frequency limit lines .
Similarly, loading a frequency limit line deletes any time limit lines .
Example :
:MMEM :LOAD :LIM LLINE2,"C :mylimit .lim "
Remarks: There is no SCPI short form for parameters
LLINElILLINE2 .
Front Panel
Access: File, Load, Type, Limits
Load an Instrument State from a File
1.*4EMory :LOAD :STATe 1,<file name>
The contents of the state file are loaded into the current instrumen t
state.
Example :
:MMEM :LOAD :TRAT 1,"C :mystate .sta "
Remarks : See also commands :MMEMory : LOAD : STATe an d
:MMEMory :STORe :STATe
If the revision of the state being loaded is newer than
the revision of the instrument, no state is recalled and
an error is reported .
If the revision of the state being loaded is equal to th e
revision of the instrument, all regions of the state wil l
be loaded .
If the revision of the state being loaded is older than th e
revision of the instrument, the instrument will only
load the older regions of the state .
Front Panel
Access: File, Load, Type, Stat e
Load a Trace From a File to the Instrumen t
:MMEMory :LOAD :TRACe <file name>
The contents of the file are loaded into TRACE 1 . The file name mus t
have a file extension of .trc or .csv. The file extension determines
whether a trace is loaded, or a trace with its state, are loaded . The .csv
extension is for trace files using the CSV (comma-separated values )
format. The .trc extension is for files that include both trace and stat e
data.
Example : :MMEM :LOAD :TRAC "C :mytrace .trc "
Remarks : See also commands :MMEMory : LOAD : STATe and
:MMEMory :STORe :STAT e
5-72 Chapter 5