Agilent Technologies ESA-E Series Programmer's Manual page 196

Language Reference
CALCulate:MARKer Subsectio n
Access :
Marker, Readout, Frequency
Marker, Readout, Time
Marker, Readout, Inverse Tim e
Marker, Readout, Perio d
Span-Markers Span X Value
:CALCulate :MARKer[1]I21314 :X :SPAN <param >
:CALCulate :MARKer[I]I21314 :X :SPAN ?
Change the frequency span of the designated span-type marker pair t o
position the markers at the desired trace X values . The value is in the
X-axis units (which is usually frequency or time) . Use
:CALCulate :MARKer :MODE SPAN to select span markers .
The query returns the current X-value frequency span of the designate d
markers .
Default Unit: Matches the units of the trace on which the marker s
are positioned.
Front Panel
Access:
Marker, <active marker>, Spa n
Band-Markers Start Frequency X Value
:CALCulate :MARKer[1]121314 :X:STARt <param>
:CALCulate :MARKer[1]121314 :X:STARt ?
Position the start (reference) frequency of the designated band-typ e
marker pair, at the specified trace X value . The value is in the X-axis
units (which is often frequency or time) . Use
CALCulate :MARKer :MODE BAND to select band markers .
The query returns the current X-value start/reference frequency of th e
designated marker.
Default Unit: Matches the units of the trace on which the marker s
are positioned
Front Panel
Access:
Marker, <active marker>, Start
Band-Markers Stop Frequency X Value
:CALCulate :MARKer[1]121314 :X:STOP <param>
:CALCulate :MARKer[1]I21314 :X :STOP ?
5-36 Chapter 5