Printer Setup And Operation - Agilent Technologies ESA Series Getting Started Manual
Spectrum analyzer
Hide thumbs
Also See for ESA Series:
- User's/programmer's reference (426 pages) ,
- Manual (194 pages) ,
- User's and service manual (30 pages)
Table of Contents
Advertisement
Installation and Setup
Printer Setup and Operation
Printer Setup and Operation
A printer can be connected to your analyzer if it is equipped with an external I/O interface. Supported
printers accept Hewlett-Packard Printer Control Language Level 3 (PCL3) or 5 (PCL5). Refer to the
documentation or specifications supplied with your printer, or contact the manufacturer to identify
your printer's language.
Equipment
• IEEE 1284 compliant printer cable.
• Supported and tested printers are listed below. Note that there are many PCL3/5 printers that may
work with your analyzer, however, they have not been tested.
— PCL3 printers include most HP DeskJet printers.
— PCL5 printers include most HP LaserJet printers.
The following printers are not compatible with your analyzer:
NOTE
HP Deskjet 720C, 722C, 820C and 1600C
Epson MX-80, FX-85, Stylus, and LQ-570
Printer Models
HP DeskJet 310, 320, 350C, 400L
HP DeskJet 500C, 550C, 600, 660C, 672C, 680C,
682C, 690C, 693C
HP DeskJet 840C, 850C, 870C, 890C, 895C
HP DeskJet 935C, 970C, 990C
HP DeskJet 1120C, 1150C
HP Inkjet 2000C
HP LaserJet III
HP LaserJet 4P
HP LaserJet 5L, 5M, 5N, 5P, 5SI
HP LaserJet 6L, 6MP
HP LaserJet 2100 Series,
HP LaserJet 4050N
HP LaserJet 5000GN
HP Professional Series 2500CM
HP Professional Series 2500CM
18
Language Type
Color Capable
PCL3
yes
PCL3
yes
PCL3
yes
PCL3
yes
PCL3
yes
PCL 3
yes
PCL3/5
no
PCL3/5
no
PCL3/5
no
PCL5
no
PCL3/5
no
PCL3/5
yes
PCL3/5
yes
PCL3
yes
PCL3
yes
Chapter 1
Advertisement
Table of Contents
