Agilent Technologies ESA-E Series Programmer's Manual page 297

Language Reference
STATus:QUEStionable Subsectio n
This command determines which bits in the Questionable Frequenc y
Condition register will set the corresponding bit in the Questionabl e
Frequency Event register when that bit has a positive transition (0 t o
1) . The variable <number> is the sum of the decimal values of the bit s
that you want to enable .
Factory Preset
and *RST: 32767 (all 1's)
Range : 0 to 32767
Questionable Integrity Condition
STATus :QUEStionable :INTegrity :CONDition ?
This query returns the decimal value of the sum of the bits in th e
Questionable Integrity Condition register .
NOTE
The data in this register is continuously updated and reflects the
current conditions .
Questionable Integrity Enable
STATus :QUEStionable :INTegrity :ENABle <number>
STATus :QUEStionable :INTegrity :ENABle?
This command determines which bits in the Questionable Integrity
Condition Register will set bits in the Questionable Integrity Event
register, which also sets the Integrity Summary bit (bit 9) in th e
Questionable Register. The variable <number> is the sum of the
decimal values of the bits you want to enable .
Factory Prese t
and *RST: 32767 (all 1's)
Range : 0 to 32767
Questionable Integrity Event Query
:STATus :QUEStionable :INTegrity[ :EVENt] ?
This query returns the decimal value of the sum of the bits in th e
Questionable Integrity Event register.
NOTE
The register requires that the equivalent PTR or NTR filters be set
before a condition register bit can set a bit in the event register.
The data in this register is latched until it is queried . Once queried, th e
data is cleared .
Chapter 5 5-137