Agilent Technologies ESA-E Series Programmer's Manual page 267

Language Referenc e
[SENSe] :MIXer Subsectio n
[SENSe]:MIXer Subsection
Select External Mixer Band
[ :SENSe] :MIRer :BAND
K I A IQI U I V I E I W I F I D I G I Y I J I USE R
[ :
SENSe ] :Mixer : BAND?This command allows the selection of one o f
the pre-defined bands corresponding to the external mixer currently i n
use . This command is available only on model E4407B analyzers havin g
Option AYZ .
Factory Prese t
and *RST: Band A (26 .5-40 Ghz )
Remarks: If the mixer harmonic configuration
([ :SENSe] :MIXer :HARMonic :AUTO <boolean>) i s
set to manual, then a query will return "USER" .
NOTE
Bands K, E, W, F, D, G, Y, and J are not available if Mixer Type is set t o
Presel.
Front Panel
Access :
Input/Output (or Input), Input Mixer, Ext Mix Ban d
External Mixer Bias Adjust
[ :SENSe] :MIxer :BIAS <numeric>
[ :SENSe] :MIXer :BIAS ?
This command allows the adjustment of an internal bias source for us e
with external mixers. This command is available only on model E4407B
analyzers having Option AYZ.
Factory Prese t
and *RST:
0
Range : -10 mA to 10 m A
Default Unit: m A
Remarks: The bias signal is present on the center conductor of th e
IF INPUT connector on the front panel . See relate d
command [ : SENSe ] :Mixer :
BIAS [ :
STATe ]
OFFIONI0I1 .
NOTE Mixer Bias will be Off if AUTO Harmonic and Presel Mixer Type i s
selected.
Front Panel
Access :
Input/Output (or Input), Input Mixer, Mixer Config, Mixe r
Bias On Off
Chapter 5 5-107