Agilent Technologies ESA-E Series Programmer's Manual page 197

Language Reference
CALCulate :MARKer Subsectio n
Position the stop frequency of the designated band-type marker pair, at
the specified trace X value . The value is in the X-axis units (which i s
often frequency or time) . Use :
CALCul ate : MARKer :MODE BAND to
select band markers .
The query returns the current X-value stop frequency of the designate d
marker.
Default Unit: Matches the units of the trace on which the marker s
are positioned
Front Panel
Access :
Marker, <active marker>, Sto p
Marker Read Y Value
:CALCulate :MARKer[1]121314 :Y ?
Read the current Y value for the designated marker or delta on it s
assigned trace . The value is in the Y-axis units for the current trac e
(which is often dBm) .
Default Unit: Matches the units of the trace on which the marker i s
positioned
Remarks:
This command can be used to read the results o f
marker functions
such
as hand power and noise tha t
are displayed in the marker value field on the analyzer.
Chapter 5
5-37