Agilent Technologies ESA-E Series Programmer's Manual page 175

Esa spectrum analyzers

Hide thumbs Also See for ESA-E Series:

Table of Contents

Language Reference

CALibration Subsystem

This command is only applicable on Agilent ESA models E4402B ,

E4403B, E4404B, E4405B, E4407B, and E4408B . Before executing this

command, connect a cable between front panel connector RF OUT and

the INPUT connector. The alignment will fail using command CAL : TG if

the cable is not connected .

Front Pane l

System, Alignments, Align Now, T G

Chapters

Table of Contents