Agilent Technologies ESA-E Series Programmer's Manual page 192

Language Reference
CALCuIate :MARKer Subsection
Turns the selected marker on or off.
Front Pane l
Access :
Marker, Off
Marker Table On/Off
:CALCulate :MARKer :TABLe :STATe OFFIONIO1 1
:CALCulate :MARKer :TABLe :STATe ?
Turns the marker table on or of f
Front Panel
Access :
Marker, Marker Table On Of f
Marker to Trace
:CALCulate :MARKer[1]121314 :TRACe <integer>
:CALCulate :MARKer[1)I21314 :TRACe?
Assigns the specified marker to the designated trace 1, 2, or 3 .
Factory Preset
and *RST: 1
Range : 1 to 3
Front Panel
Access :
Marker, Marker Trace Auto 1 2 3
Marker to Trace Aut o
:CALCulate :MARKer[1]121314 :TRACe :AUTO OFFIONIO1 1
:CALCulate :NARKer[1]I21314 :TRACe :AUTO ?
Turns on or off the automatic marker to trace function .
Factory Preset
and *RST:
AUTO ON
Front Panel
Access :
Marker, Marker Trace Auto 1 2 3
Continuous Signal Tracking Function
:CALCulate :MARKer[1]121314 :TRCKing[ :STATe] OFFIONIO1 1
:CALCulate :MARKer[1]I21314 :TRCKing[ :STATe] ?
Turns on or off marker signal tracking . It continuously puts the
selected marker on the highest displayed signal peak and moves it t o
the center frequency. This allows you to keep a signal that is drifting in
frequency, on the display.
5-32 Chapter 5