Agilent Technologies ESA-E Series Programmer's Manual page 300

Language Reference
STATus:QUEStionable Subsectio n
Questionable Negative Transition
STATus :QUEStionable :NTRansition <number>
STATus :QUEStionable :NTRansition ?
This command determines which bits in the Questionable Conditio n
register will set the corresponding bit in the Questionable Even t
register when that bit has a negative transition (1 to 0) . The variable
<number> is the sum of the decimal values of the bits that you want t o
enable .
Factory Preset
and *RST: 0
Range :
0 to 3276 7
Questionable Power Conditio n
:
STATus : QUEStionable : POWer : CONDition ?
This query returns the decimal value of the sum of the bits in the
Questionable Power Condition register.
NOTE
The data in this register is continuously updated and reflects th e
current conditions .
Questionable Power Enabl e
STATus :QUEStionable :POWer :ENABle <number>
STATus :QUEStionable :POWer :ENABle?>
This command determines which bits in the Questionable Powe r
Condition Register will set bits in the Questionable Power Even t
register, which also sets the Power Summary bit (bit 3) in th e
Questionable Register. The variable <number> is the sum of th e
decimal values of the bits you want to enable.
Factory Preset
and *RST: 32767 (all 1 's)
Range: 0 to 3276 7
Questionable Power Event Quer y
:STATus :QUEStionable :POWer[ :EVENt] ?
This query returns the decimal value of the sum of the bits in the
Questionable Power Event register.
5-140 Chapter 5