Agilent Technologies ESA-E Series Programmer's Manual page 270

Language Reference
[ :SENSe]:OBWidth Subsection
[:SENSe] :OBWidth Subsection
Set OBW Number of Averages
[ :SENSe] :OBWidth :AVERage :COUNt <integer>
[ :SENSe] :OBWidth :AVERage :COUNt ?
Set the occupied bandwidth measurement number of averages .
Remarks: This command is used for measurements in th e
MEASURE
menu.
Front Panel
Access :
Meas Setup, Avg Number
OBW Averaging On/Off
[ :SENSe] :OBWidth :AVERage[ :STATe] OFFIONI01 1
[ :SENSe] :OBWidth :AVERage[ :STATe] ?
Turn on or off occupied bandwidth averaging.
Factory Preset
and *RST: Of f
Remarks: This command is used for measurements in th e
MEASURE
menu.
Front Panel
Access :
Meas Setup, Avg Number On Of f
Set OBW Spa n
[ :SENSe] :OBWidth :FREQuency :SPAN <freq >
[ :SENSe] :OBWidth :FREQuency :SPAN ?
Set the occupied bandwidth span. The analyzer span will retain thi s
value throughout the measurement .
Remarks: This command is used for measurements in th e
MEASURE
menu.
Front Panel
Access:
Meas Setup, OBW Spa n
5-110 Chapters