Agilent Technologies ESA-E Series Programmer's Manual page 357

Error Messages
201 to 799: Device-Specific Errors
607 File Name Error
An invalid file name has been specified . Use filenames
with a maximum of 8 characters (letters and digit s
only) and use a 3 character extension . Note that
lowercase and uppercase are perceived as the same .
This error will also occur if you attempt to delete a
nonexistent file .
612
File not foun d
The analyzer could not find the specified file .
613 Flash memory is ful l
The internal flash memory is full . Clear some space by
deleting unwanted files. You may also increase the flash
memory size by purchasing
Option B72.
602 Floppy disk error
An unknown error has occurred while accessing the
floppy disk.
601 Floppy disk full
The floppy disk is full. Clear some space by deleting
unwanted files.
618 Illegal write access of Flash memory
Attempt to write to an unavailable area of interna l
flash memory.
727 In <filename> : [DATA] header missing
This message indicates that the data section of a fil e
did not begin with the token [DATA] .
728 In <filename>, line <nnn> : separator missing
The
[HEADER]
section of a file contains entrie s
requiring an equal (=) sign, such as <keyword> =
<value>. This message appears if the equal sign doe s
not appear on the line .
Chapter 7 7-29