Agilent Technologies ESA-E Series Programmer's Manual page 258

Language Reference
[:SENSe] :EBWidth Subsection
[:SENSe]:EBWidth Subsection
Set Emission BW Number of Average s
[ :SENSe] :EBWidth :AVERage:COUNt <integer>
[ :SENSe] :EBWidth :AVERage :COUNt ?
Set the emission bandwidth measurement number of averages .
Remarks: This command is used for measurements in th e
MEASURE
menu.
Front Panel
Access :
Meas Setup, Avg Numbe r
Emission BW Averaging On/Off
[ :SENSe] :EBWidth :AVERage[ :STATe] OFFIONI01 1
[ :SENSe] :EBWidth :AVERage[ :STATe] ?
Turn on or off the channel power measurement averaging.
Factory Preset
and *RST: Of f
Remarks: This command is used for measurements in th e
MEASURE
menu .
Front Panel
Access: Meas Setup, Avg Number On Of f
Set Emission BW Span
[ :SENSe] :EBWidth:FREQuency :SPAN <freq>
[ :SENSe] :EBWidth:FREQuency :SPAN ?
Set the emission bandwidth span . The analyzer span will retain this
value throughout the measurement .
Remarks: This command is used for measurements in th e
MEASURE
menu.
Front Panel
Access:
Meas Setup, EBW Spa n
5-98 Chapter 5