Agilent Technologies ESA-E Series Programmer's Manual page 12

Content s
Measure Main Channel Power 5-6 5
Measure Lower Channel Power
5-6 5
Measure Upper Channel Power 5-6 6
Measure Channel Power and Density 5-6 6
Measure Channel Power 5-6 6
Measure Channel Power Density 5-6 6
Measure Emission Bandwidth 5-6 6
Return Harmonic Amplitudes 5-66
Return Harmonic N Amplitude 5-6 7
Return % Total Harmonic Distortion 5-6 7
Return Harmonic Frequency List 5-6 7
Return Harmonic N Frequency
5-68
Return Fundamental Frequency 5-6 8
Measure OBW and Transmit Frequency Error 5-68
Measure Occupied Bandwidth 5-69
Measure Transmit Frequency Error 5-69
MMEMory Subsystem 5-70
Catalog the Selected Memory Location 5-70
Copy a File 5-70
Move Data to File 5-7 1
Delete a File 5-7 1
Load a Corrections Table from a File
5-7 1
Load a Limit Line from Memory to the Instrument 5-7 1
Load an Instrument State from a File 5-7 2
Load a Trace From a File to the Instrument 5-7 2
Create a New Directory 5-7 3
Delete a Directory 5-73
Store a Corrections Table to a File 5-73
Store a Limit Line in a File 5-74
Store a Screen Image in a Graphic File 5-74
Store an Instrument State in a File 5-74
Store a Trace in a File 5-74
OUTPut Subsystem 5-76
Turn Output On/Off 5-76
READ Subsystem 5-7 7
Measure Main, Lower, and Upper Channel Power 5-7 7
Measure Main Channel Power 5-7 7
Measure Lower Channel Power 5-7 7
Measure Upper Channel Power 5-7 7
Measure Channel Power and Density 5-7 8
Measure Channel Power 5-78
Measure Channel Power Density 5-7 8
Measure Emission Bandwidth
5-7 8
Return Harmonic Amplitudes 5-78
Return Harmonic N Amplitude 5-79
Return % Total Harmonic Distortion 5-79
Return Harmonic Frequency List 5-7 9
Return Harmonic N Frequency
5-80
Return Fundamental Frequency 5-80
xii