Agilent Technologies ESA-E Series Programmer's Manual page 340

Error Messages
Informational Message s
Table saved successfully .
This message appears after the user presses the
Save Table
key on the second page of the edit table for
the out-of-band spurious measurement. It indicates
that the current spur table has been writte n
successfully to disk and is available to be loaded by
means of the
Load Table
key.
Volume <name> formatted
The indicated disk has been successfully formatted .
The calibration data is invalid, and has bee n
cleared .
A parameter has changed that affects calibration .
Therefore the calibration data has been reset, and fo r
best results recalibration is recommended .
The file containing the list of cable type s
has been updated .
The file update was successful.
This operation requires a measurement to b e
active .
The analyzer cannot perform this operation, as i t
requires a measurement to be running.
7-12 Chapter 7