Reading The Capacitance Data At Dut Measurement; To Set The Beeper Mode - Agilent Technologies 4349B Manual

Reading the Capacitance Data at DUT Measurement

1. Select the channel.
2. Press .
3. Select using
4. Select using
5. The capacitance value at measured DUT is displayed.
The condition of
Where
MeasC
Data displayed in
Limit
Data displayed in
The capacitance is not measured in the case of the contact check function is unenabled.

To Set the Beeper Mode

To set the beeper mode for the comparator result reporting:
1. Press .
2. Select using
3. Select the desired beeper mode using
4. Select using
2-10 Operating the 4349B
or , then press
or , then press
(No Connection) is shown below.
MeasC < Limit
or and press
or and press
.
.
.
or and press
.
4349B
.