Configuring The Characteristics Of An External Lo; Custom Command Set - Agilent Technologies NFA Series Quick Reference Manual

Step 1. Press the
Step 2. Select the
Step 3. Select the
Figure 4-4
Performing System Operations

Configuring the Characteristics of an External LO

Configuring the Characteristics of an
External LO
The NFA can control an external LO using its LO GPIB port.

Custom Command Set

If the LO has a GBIB you are unlikely to use the custom command set.
However, you can customize a command set to define the operation of a
non-GPIB compatible LO.
To access the menu to configure the command characteristics of an
external LO:
key.
System
External LO
LO Commands
External LO Commands Form
62
menu key.
menu key.
Chapter 4