Syntax
Attribute
Summary
Description
Programming Commands
HCOPy Subsystem
HCOPy Subsystem
Use the command in this subsystem to print the displayed measurement
results to a printer. This subsystem has the following command hierarchy:
:HCOPy
[:IMMediate]
[:IMMediate]
Prints measurement results on a printer.
:HCOPy:IMMediate
Preset State: none
*RST State: none
SCPI Compliance: standard
Command Only
Connect the printer to the Agilent 86120B's rear-panel PARALLEL PRINTER PORT
connector. The output to the printer is ASCII text.
MEASure Measurement Instruction
For information on the MEASure measurement instruction,
ment Instructions" on page
5-68
5-15.
refer to "Measure-