Hcopy Subsystem - Agilent Technologies 86120C User Manual

Programming Commands

HCOPy Subsystem

HCOPy Subsystem
Use the command in this subsystem to print the displayed measure-
ment results to a printer. This subsystem has the following command
hierarchy:
:HCOPy
[:IMMediate]
Prints measurement results on a printer.
Syntax
:HCOPy:IMMediate
Attribute Preset State: none
Summary *RST State: none
SCPI Compliance: standard
Command Only
Description Connect the printer to the Agilent 86120C's rear- panel PARALLEL
PRINTER PORT connector. The output to the printer is ASCII text.
4-80
[:IMMediate]