Hcopy Subsystem; Abort The Print; Printer Type; Color Hard Copy - Agilent Technologies ESA-E Series Programmer's Manual

Language Reference

HCOPy Subsystem

HCOPy Subsystem
The HCOPy subsystem controls the setup of plotting and printing to an
external device.

Abort the Print

:HCOPy:ABORt
Aborts hard copy printout of results.
Front Panel
Access:
ESC

Printer Type

:HCOPy:DEVice:TYPE AUTO|CUSTom|NONE
:HCOPy:DEVice:TYPE?
Sets up the printer by selecting printer type.
AUTO - the instrument queries the printer to determine the printer
type and automatically sets itself for that printer
CUSTom - allows you to select a custom printer if your printer
cannot be auto-configured
NONE - tells the instrument that the hardcopy output device is not a
printer
Factory Preset
and *RST: The factory default is AUTO. This parameter is
persistent, which means that it retains the setting
previously selected, even through a power cycle.
Front Panel
Access:
Print Setup, Printer Type

Color Hard Copy

:HCOPy:IMAGe:COLor[:STATe] OFF|ON|0|1
:HCOPy:IMAGe:COLor[:STATe]?
Selects between color and monochrome mode for hardcopy output.
Factory Preset
and *RST: The factory default is On. This parameter is persistent,
which means that it retains the setting previously
selected, even through a power cycle.
5-54
(with print in progress)
Chapter 5