BrvtÃTh
rq
Xv
rTprÃhÃhÃByhpr
WireScope at a Glance
Control Buttons
1−2
Qr
Ãi
PFÃi
Tp
yyÃi
You control the WireScope 350 using a combination of mechanical and
on-screen buttons. The three mechanical buttons are at the bottom of the
WireScope's face.
Power: The Power button turns the unit on. If the unit is already on,
pressing the power button opens the sleep/shut-down dialog box. The
unit goes to sleep in 5 seconds unless you cancel this option.
When the unit is asleep, touching the screen or buttons wakes it to the
state it was in before it went to sleep.
Pressing and holding the power button for two seconds turns the unit
off.
OK: Pressing the OK button executes a selected onscreen action. A
dark blue color indicates the selected action on all screens.
Scroll: The Scroll button scrolls screens that contain long lists.