Dhcp Server Pool Configuration - Planet WGS-5225-8P2SV User Manual

4.2.5.3 DHCP Server pool Configuration

This page manages DHCP pools. According to the DHCP pool, DHCP server will allocate IP address and deliver configuration
parameters to DHCP client. screen in
The page includes the following fields:
Object
 Name
 Type
 IP
 Subnet Mask
 Reserved Only
 Lease Time
Buttons
: Click to add a new excluded IP range.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-2-43 appears.
Figure 4-2-43: DHCP server pool Page Screenshot
Description
Configure the pool name that accepts all printable characters, except white
space. If you want to configure the detail settings, you can click the pool name to
go into the configuration page.
Display which type of the pool is.
Network: the pool defines a pool of IP addresses to service more than one
DHCP client.
Host: the pool services for a specific DHCP client identified by client identifier or
hardware address.
Display network number of the DHCP address pool.
If "-" is displayed, it means not defined
Display subnet mask of the DHCP address pool.
If "-" is displayed, it means not defined.
If on, Ip addresses optainable from the pool are limited to those entered into the
reserved entries table.
Display lease time of the pool.
102
User's Manual of WGS-5225-8P2S Series