The page includes the following fields:
Object
DHCP State
IP Address
Subnet Mask
Gateway
DNS Server 1/2
4.2.1.3 IPv6 Configuration
The IPv6 Configuration includes Auto Configuration, IPv6 Address and Gateway. The configured column is used to view or
change the IPv6 configuration. Fill out the Auto Configuration, IPv6 Address and Gateway for the device. The screens in
4-2-4
&
Figure 4-2-5
appear.
The page includes the following fields:
Object
Auto Configuration
User's Manual of GS-4210-8UP2S/GS-4210-16UP4C/GS-4210-24UP4C
Figure 4-2-3 IP Information Page Screenshot
Description
Display the current DHCP state.
Display the current IP address.
Display the current subnet mask.
Display the current gateway.
Display the current DNS server.
Figure 4-2-4 IPv6 Address Setting Page Screenshot
Description
Enable IPv6 auto-configuration by checking this box.
If it fails, the configured IPv6 address is zero. The router may delay responding to
a router solicitation for a few seconds; the total time needed to complete
auto-configuration can be significantly longer.
59
Figure