Radware Alteon Application Manual page 88

Application switch operating system
Hide thumbs Also See for Alteon:
Table of Contents

Advertisement

Alteon Application Switch Operating System Application Guide
VLANs
3. Configure the default gateways. Configure gateways 5 and 6 for VLANs 2 and 3, respectively.
Configure default gateway 1 for load-balancing session requests and as backup when gateways
5 and 6 fail.
>>
/cfg/l3/gw 5
>> Default gateway 5#
>> Default gateway 5#
>> Default gateway 6#
>> Default gateway 6#
>> Default gateway 1#
Note:
The IP address for default gateways 1 to 4 must be unique. IP addresses for default
gateways 5 to 259 can be set to the same IP address as the other gateways (including default
gateway 1 to 4). For example, you can configure two default gateways with the same IP address
for two different VLANs.
4. Add the VLANs to the gateways and enable them.
>>
/cfg/l3/gw 5
>> Default gateway 5#
>> Default gateway 5#
>> Default gateway 5#
>> Default gateway 6#
>> Default gateway 6#
>> Default gateway 6#
>> Default gateway 1#
5. Apply and verify your configuration.
>> Default gateway 1#
6. Optionally, configure the local networks using address and mask pairs to ensure that the VLANs
use the configured default gateways.
>> Default gateway 1#
>> IP Forwarding#
>> IP Forwarding# add 172.21.2.0
255.255.255.0
>> IP Forwarding# add 172.21.3.0
255.255.255.0
7. Apply and save your new configuration changes.
>> IP Forwarding# apply
>> IP Forwarding# save
88
addr 10.10.1.20
/cfg/l3/gw 6
addr 10.10.1.30
/cfg/l3/gw 1
addr 10.10.4.1
vlan 2
ena
/cfg/l3/gw 6
vlan 3
ena
/cfg/l3/gw 1
ena
/cfg/l3/cur
/cfg/l3/frwd/local
add 10.10.0.0 255.255.0.0
(Select gateway 5)
(Assign IP address for gateway 5)
(Select default gateway 6)
(Assign IP address for gateway 6)
(Select default gateway 1)
(Assign IP address for gateway 1)
(Select gateway 5)
(Add VLAN 2 for default gateway 5)
(Enable gateway 5)
(Select gateway 6)
(Add VLAN 3 for default gateway 6)
(Enable gateway 6)
(Select default gateway 1)
(Enable gateway 1 for all VLAN s)
(View current Layer 3 settings)
(Select the local network menu)
(Specify the network for routers 1, 2, and
3)
(Specify the network for VLAN 2)
(Specify the network for VLAN 3)
Document ID: RDWR-ALOS-V2900_AG1302

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents