Radware Alteon Application Manual page 369

>> Filter 10# group 10
>> Filter 10# vlan any
>> Filter 10# ena
2. Configure Filter 10 to enable the Redirect to Proxy option.
>> # /cfg/slb/filt 10/adv
>> Filter 10 Advanced# redir
>> Filter 10 Advanced# rtproxy ena
3. Configure Filter 20 to allow client traffic from the proxy to browse the Web.
>> # /cfg/slb/filt 20
>> Filter 20# sip 1.1.0.0
>> Filter 20# smask 255.255.0.0
>> Filter 20# dip any
>> Filter 20# dmask 0.0.0.0
>> Filter 20# ipver v4
>> Filter 20# action allow
>> Filter 20# vlan any
>> Filter 20# ena
4. Configure Filter 20 to enable the Return to Source MAC address option. This adds an opposite
entry in the session table so that the return traffic matches its source MAC address.
>> # /cfg/slb/filt 20/adv
>> Filter 20 Advanced# rtsrcmac ena
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Redirect to Real Server Group 10)
(To any VLAN)
(Enable the filter)
(Select the Advanced menu for Filter 10)
(Select the Redirection Advanced menu
for Filter 10)
(Enable redirect to proxy server)
(Select the menu for Filter 20)
(From the proxy IP address)
(From the proxy IP mask)
(To any network destination address)
(For any subnet range)
(Set filter IP version to IP Version 4)
(Allow matching traffic to pass)
(To any VLAN)
(Enable the filter)
(Select the Advanced menu for Filter 20)
(Enable Return to Source MAC Address)
Filtering and Traffic Manipulation
369