Radware Alteon Application Manual page 439

To load an AlteonOS image
This procedure upgrades both ADC-VX and ADC application images with a single operation, whether
the system is in standalone or ADC-VX mode.
1. Access the Active Switch Configuration Boot menu.
>> Standalone ADC - Main# boot
[Boot Options Menu]
virtual - Switch mode from Standalone to ADC-VX
image - Select software image to use on next boot
conf - Select config block to use on next boot
gtimg - Download new software image via FTP/TFTP/SCP
reset - Reset switch [WARNING: Restarts Spanning Tree]
cur - Display current boot options
Enter to
2. gtimg load the AlteonOS image.
>> Standalone ADC - Boot Options#gtimg
Enter image type [all|vx|adc]: all
ADC-VX Infrastructure Images:
ID Version
-- -------
1 28.1.0.5
2 28.1.0.0
3 28.1.0.1
4 28.1.0.2
Enter Image ID to be replaced (1-4): 2
ADC Application Images:
ID Version
-- -------
1 17:41:28 Sun Jan 13, 2013
2 28.1.0.0
3 28.1.0.2
4 28.1.0.3
5 28.1.0.4
6 28.1.0.5
7 28.1.0.6
8 28.1.0.7
9 28.3.0.0
10 28.4.0.0
Enter Image ID to be replaced (1-10): 2
Enter hostname or IP address of FTP/TFTP/SCP server: 10.210.31.39
Enter name of file on FTP/TFTP/SCP server: AAS-28.1.0.12--IF-AlteonOS
Enter username for FTP/SCP server or hit return for TFTP server:
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
Downloaded
----------
17:41:28 Sun Jan 13, 2013
12:45:39 Wed Mar 31, 2013
17:41:28 Sun Jan 13, 2013
12:45:39 Wed Mar 31, 2013
Downloaded
----------
Incompatible
12:45:39 Wed Mar 31, 2013
17:41:28 Sun Jan 13, 2013
12:45:39 Wed Mar 31, 2013
17:41:28 Sun Jan 13, 2013
12:45:39 Wed Mar 31, 2013
17:41:28 Sun Jan 13, 2013
12:45:39 Wed Mar 31, 2013
17:41:28 Sun Jan 13, 2013
12:45:39 Wed Mar 31, 2013
ADC-VX Management
Image status
------------
Idle
Idle
Idle
Idle
Image status vADC IDs
------------ --------
-
Active
Active
Active 10-12
Active 15-20
Idle
Idle
Idle
Active
Idle
6
7
28
1-5
22
-
439