Radware Alteon Application Manual page 424

Application switch operating system
Hide thumbs Also See for Alteon:
Table of Contents

Advertisement

Alteon Application Switch Operating System Application Guide
ADC-VX Management
3. The initial Management IP is the address assigned to the vADC for initial access. This address
can be changed by the vADC Administrator based on the vADC's specific requirements:
>> Global - vADC 4 sys/mmgmt# addr 10.203.114.54
Current vADC IP address:
New pending vADC 4 IP address: 10.203.114.53
>> Global - vADC 4 sys/mmgmt# mask 255.255.0.0
Current vADC subnet mask:
New pending vADC 4 subnet mask: 255.255.0.0
>> Global - vADC 4 sys/mmgmt# gw 10.203.1.1
Current vADC default gateway:
New pending vADC 4 default gateway: 10.203.1.1
>> Global - vADC 4 sys/mmgmt# unlock
Current status: locked
New status:
unlocked
4. Assign to a vADC the exact application throughput requirement.
Note:
When assigning a vADC with the required throughput, no capacity units are assigned. You
must do this separately.
>> vADC 4# limit 1000
Current Settings:
vADC 4 throughput assignment: 625 Mbps, ssl assignment: 4200 CPS,
compression assignment: 0 Mbps
New Settings:
vADC 4 throughput assignment: 1000 Mbps, ssl assignment: 4200 CPS,
compression assignment: 0 Mbps
>> vADC 4# apply
------------------------------------------------------------------
Apply complete; don't forget to 'save' updated configuration.
5. When assigning capacity units, you need to consider the total allocated throughput. If the
throughput allocated is 1 Gbps, Alteon does not allow you to assign only one capacity unit, but
instead requires you to assign at least two capacity units.
>> vADC 4# cu 2
Current Settings:
vADC 4 Assigned Capacity Units:
New Settings:
vADC 4 Assigned Capacity Units: 2
6. Each vADC requires at least one VLAN assigned to it. A vADC supports any type of interface
represented by a VLAN ID. Alteon uses VLAN IDs to represent any type of link, and such links
can be associated with a vADC (trunk, dedicated link, VLAN tag on a dot1q trunk, team, shared
interface, and so on).
For an example of assigning a VLAN shared interface to a vADC, see
Interface to a vADC, page
424
0.0.0.0
0.0.0.0
0.0.0.0
428.
Assigning a VLAN Shared
Document ID: RDWR-ALOS-V2900_AG1302

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents