Radware Alteon Application Manual page 215

To configure a network class
1. Access the Network Class menu.
>> # /cfg/slb/nwclss
2. At the prompt, enter the network class ID you want to configure. The Network Class menu
displays.
[Network Class NWC1 Menu]
name - Set network class name
network - Network Element Menu
ipver - Set IP version
copy - Copy network class
del - Delete network class
cur - Display current network class
3. To define the network class name for that ID, enter name. At the prompt, enter the name you
want to define.
4. To set a network element for the network class, enter network. At the prompt, enter the
network element ID you want to set. The Network Element menu displays.
[Network Class NWC1 Network 123 Menu]
net - Set network element
del - Delete network element
cur - Display current network element
5. Enter net to define the network element. At the prompt, do one of the following:
— Enter range to define a range of IP addresses, and the network match type.
Enter network type [range|subnet] [subnet]: range
Enter from IP address []:
Enter to IP address []:
Enter network match type [exclude|include] [include]:
— Enter subnet to define an IP address, a subnet mask, and the network match type.
Enter network type [range|subnet] [range]: subnet
Enter IP address []:
Enter subnet mask []:
Enter network match type [exclude|include] [include]:
For a description of all of the
Operating System Command Reference.
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
commands, refer to the Alteon Application Switch
/cfg/slb/nwclss
Server Load Balancing
215