Radware Alteon Application Manual page 717

>> Real server group 1# health http
>> Real server group 1# content index.html
4. On the San Jose Alteon, define a virtual server.
All client requests are addressed to a virtual server IP address defined on Alteon. Clients acquire
the virtual server IP address through normal DNS resolution. HTTP uses well-known TCP port 80.
In this example, HTTP is configured as the only service running on this virtual server IP address
and, is associated with the real server group. For example:
>> Real server group 1# /cfg/slb/virt 1
>> Virtual server 1# vip 200.200.200.100
>> Virtual Server 1# service 80
>> Virtual server 1 http Service# group 1
>> Virtual server 1 http Service# /cfg/slb/virt 1
ena
This configuration is not limited to HTTP services. For a list of other well-known TCP/IP services
and ports, see Well-Known Application Ports, page
5. On the San Jose Alteon, define the type of Layer 4 traffic processing each port must support.
The ports are configured as follows:
>> Virtual server 1# /cfg/slb/port 4
>> SLB port 4# server ena
>> SLB port 4# /cfg/slb/port 3
>> SLB port 3# server ena
>> SLB port 3# /cfg/slb/port 2
>> SLB port 2# client ena
6. On the San Jose Alteon, enable SLB.
>> SLB port 6# /cfg/slb/on
To configure the San Jose Site for GSLB
1. On the San Jose Alteon, turn on GSLB.
>> Virtual server 1# /cfg/slb/gslb/on
2. Enable DSSP version 2 to send out remote site updates.
Note: Unless you are in the middle of network migration from an Alteon version prior to 22.0,
you should always enable DSSP version 2 or later.
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Use HTTP for health checks)
(Set URL content for health
checks)
(Select Virtual Server 1)
(Assign a virtual server IP address)
(Associate virtual port to real
group)
(Enable virtual server)
175.
(Select physical Port 4)
(Enable server processing on Port 4)
(Select physical Port 3)
(Enable server processing on Port 3)
(Select physical Port 2)
(Enable client processing on Port 2)
Global Server Load Balancing
717