Radware Alteon Application Manual page 421

To enable delegated services
After creating a basic vADC with the Creation Dialog, the Global Administrator can configure
additional settings using the vADC menu system. Under the
the Global Administrator can enable or disable certain system delegated services in order to set the
global usage policy, such as centralized logging and SMTP.
In this example, the Global Administrator may want to set a global usage policy that results in all
vADCs being required to use the organization's AAA server. To do so, the Global Administrator can
impose and lock certain delegated services so that the vADC Administrator is not able to reconfigure
them.
1. In the following steps, the syslog and RADIUS servers are enabled:
/cfg/vadc 2/sys
>> vADC 2# sys
------------------------------------------------------------
[vADC system services Menu]
mmgmt - Management Port Menu
peer - Sync Peer Management Port Menu
sync - Assign target appliance for configuration sync
haid - Set HA-ID value
syslog - System Syslog Servers
radius - System RADIUS Servers
tacacs - System TACACS Servers
access - System Access Menu
idle - System timeout for idle CLI sessions
smtp - System SMTP host
cur - Display current vADC system parameters
>> Global - vADC system services# syslog
------------------------------------------------------------
[Global - vADC 1 sys/syslog Menu]
delegate - Enable/Disable service delegation from global to vADC
lock - Lock access for vADC Administrator
unlock - Unlock access for vADC Administrator
cur - Display current settings
>> Global - vADC sys/syslog# delegate
Current Settings: disabled
Enter new Settings [d/e]:e
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
/cfg/vadc/sys
ADC-VX Management
menu, for example,
421