Radware Alteon Application Manual page 822

Alteon Application Switch Operating System Application Guide
Content-Intelligent Server Load Balancing Not Using Layer 7 Content Switching Rules
>> Filter 1 # proto tcp
Enter protocol or any: udp
Pending new protocol:
>> Filter 1 # dport http
Current destination port or range:
Pending new destination port or range:
>> Filter 1 # action redir
Current action: allow
Pending new action:
>> Filter 1 # /cfg/slb/filt/adv/layer7
>> Layer 7 Advanced# addrd
Enter filtering string ID (1-1024) to redirect
from:
Enter filtering string ID (2-1024) to redirect
to:
3. Configure Filter 2.
>> /cfg/slb/filt 2
>> Filter 2 # sip 10.46.6.0.0
Current source address:
New pending source address: 10.46.6.0.0
>> Filter 2 # smask 255.255.255.0
Current source mask:
New pending source mask: 255.255.255.0
>> Filter 2 # proto tcp
Enter protocol or any: udp
Pending new protocol:
>> Filter 2 # dport http
Current destination port or range:
Pending new destination port or range:
>> Filter 2 # action redir
Current action: allow
Pending new action:
>> Filter 2 # /cfg/slb/filt/adv/layer7
>> Layer 7 Advanced# addrd
Enter filtering string ID (1-1024) to redirect from: 2
Enter filtering string ID (2-1024) to redirect to:
822
tcp
any
http
redir
any
0.0.0.0
tcp
any
http
redir
(For TCP protocol traffic)
(To destination port HTTP)
(Redirect the traffic)
(Access the Advanced Layer 7 menu)
2 (Redirect string 2...)
3 (to string 3)
4
Document ID: RDWR-ALOS-V2900_AG1302