Radware Alteon Application Manual page 262

Alteon Application Switch Operating System Application Guide
Server Load Balancing
6. Set the required action. Since a path match was set, an action also must be specified. To leave
the path unchanged, use replace with the same path string.
>>URL Modification force-https Rule 10#action
>>URL Match#protocol https
>>URL Match#path
Current path action configuration: none
Enter path action-type [insert|replace|remove|none] [none]: replace
Enter new path to replace the matched section: /sensitive/
7. Enable the rule and the rule list.
>>URL Modification force-https Rule 10#ena
>>URL Modification force-https Rule 10#..
>>URL Modification rule-list force-https#ena
8. Apply and save. In addition, you can use cur to see the complete rule list configuration:
>>URL Modification rule-list force-https# apply
>>URL Modification rule-list force-https# save
>>URL Modification rule-list force-https# cur
Current rule-list: force-https enabled
10:
enabled
element url
match:
protocol http, port 80
path incl /sensitive/
action:
protocol https, port 443
path replace /sensitive/
direction response
body include
Example 3: Update Host and Path
All links to HTTP://www.site2.com/anypath should be updated to point to
HTTP://www.site1.com/site2/anypath.
1. Configure the required real servers, group, virtual server and HTTP service. Associate an HTTP
modification policy to achieve the HTTPS links.
>> HTTP Load Balancing Menu # httpmod
Current HTTP modifications rule-list:
Enter new HTTP modifications rule-list or none: move-site2
For HTTP Modification rule-list configuration use /cfg/slb/layer7/httpmod
2. Create the HTTP modifications rule list.
>> Main # /cfg/slb/layer7/httpmod
Enter HTTP Modification rule-list id (alphanumeric): move-site2
262
Document ID: RDWR-ALOS-V2900_AG1302