Radware Alteon Application Manual page 463

>> Real Server Group 1# add 3
>> Real Server Group 1# add 4
4. Define the group metric for the RTSP cache servers. RTSP supports all the standard load-
balancing metrics.
>>Real Server Group 1# metric leastconn
5. Configure an RTSP redirection filter to cache data and balance the load among the cache
servers.
>> # /cfg/slb/filt 1
>> Filter 1# action redir
>> Filter 1# proto tcp
>> Filter 1# dport rtsp
>> Filter 1# rport rtsp
>> Filter 1# group 1
>> Filter 1# adv/proxyadv
>> Filter 1# Advanced# proxy disable
6. Configure a default allow filter to facilitate traffic.
>> # /cfg/slb/filt 2048
>> Filter 2048# sip any
>> Filter 2048# dip any
>> Filter 2048# ena
>> Filter 2048# action allow
7. Add and enable the redirection filter on the port to support basic cache redirection.
>> # /cfg/slb/port 25
>> SLB Port 25# add 1
>> SLB Port 25# add 2048
>> SLB Port 25# filt ena
8. Apply and save the configuration.
>> SLB Port 25# apply
>> SLB Port 25# save
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Add RTSP Cache Server 3 to Group 1)
(Add RTSP Cache Server 4 to Group 1)
(Select the menu for Filter 1)
(Set the action for redirection)
(Enter TCP protocol)
(Enter service port for RTSP)
(Enter redirection port for RTSP)
(Select RTSP cache server Group 1)
(Select advanced menu for Filter 1)
(Disable proxy)
(Select a default allow filter 2048)
(From any source IP addresses)
(To any destination IP addresses)
(Enable a default allow filter)
(Set the action to allow normal traffic)
(Select the menu for Port 25)
(Add RTSP filter 1 to Port 25)
(Add default filter 2048 to Port 25)
(Enable filtering on Port 25)
Application Redirection
463