Radware Alteon Application Manual page 135

3. Configure internal peer router 1 and external peer router 2.
>> # /cfg/l3/bgp/peer 1
>> BGP Peer 1# ena
>> BGP Peer 1# addr 10.1.1.4
>> BGP Peer 1# ras 135
>> BGP Peer 1# /cfg/l3/bgp/peer 2
>> BGP Peer 2# ena
>> BGP Peer 2# addr 20.20.20.2
>> BGP Peer 2# ras 200
4. Configure redistribution for peer 1.
>> # /cfg/l3/bgp/peer 1/redist
>> BGP Peer 1# default redistribute
>> BGP Peer 1# fixed ena
5. Configure aggregation policy control. Configure the routes that you want aggregated.
>> # /cfg/l3/bgp/aggr 1
>> BGP Aggr 1# addr 135.0.0.0
>> BGP Aggr 1# mask 255.0.0.0
>> BGP Aggr 1# ena
6. Apply and save the configuration.
>> # apply
>> # save
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Select internal peer router 1)
(Enable this peer configuration)
(Set IP address for peer router 1)
(Set remote AS number)
(Select external peer router 2)
(Enable this peer configuration)
(Set IP address for peer router 2)
(Set remote AS number)
(Select redistribute)
(Set default to redistribute)
(Enable fixed routes)
(Set aggregation number)
(Add IP address to aggregate 1)
(Add IP mask to aggregate 1)
(Enable route aggregation)
Border Gateway Protocol
135