Radware Alteon Application Manual page 286

Alteon Application Switch Operating System Application Guide
Load Balancing Special Services
2. Configure the four real servers and their real IP addresses.
>> # /cfg/slb/real 20
>> Real server 20 # ena
>> Real server 20 # rip 10.10.10.20
>> Real server 20 # /cfg/slb/real 21
>> Real server 21 # ena
>> Real server 21 # rip 10.10.10.21
>> Real server 20 # /cfg/slb/real 22
>> Real server 22 # ena
>> Real server 22 # rip 10.10.10.22
>> Real server 20 # /cfg/slb/real 26
>> Real server 26 # ena
>> Real server 26 # rip 10.10.10.26
3. Configure Group 1 for UDP and Group 2 for TCP.
>> Main # /cfg/slb/group 1
>> Real server group 1 # metric roundrobin
>> Real server group 1 # health udpdns
>> Real server group 1 # add 20
>> Real server group 1 # add 21
>> Real server group 1 # /cfg/slb/group 2
>> Real server group 2 # metric roundrobin
>> Real server group 2 # health dns
>> Real server group 2 # add 22
>> Real server group 2 # add 26
For more information on configuring health checks, see
page 488.
4. Define and enable the server ports and the client ports.
For more information, see
servers initiate upstream requests and must be configured both as a server and a client.
286
Table 19 - Web Host Example: Port Usage, page
(Enable Real Server 20)
(Specify the IP address)
(Enable Real Server 21)
(Specify the IP address)
(Enable Real Server 22)
(Specify the IP address)
(Enable Real Server 26)
(Specify the IP address)
(Select Real Server Group 1)
(Specify the load-balancing metric for
Group 1)
(Set the health check to UDP)
(Add Real Server 20)
(Add Real Server 21)
(Specify the load-balancing metric for
Group 2)
(Set the health check to TCP)
(Add Real Server 22)
(Add Real Server 26)
TCP and UDP-based DNS Health Checks,
173. Some DNS
Document ID: RDWR-ALOS-V2900_AG1302