Radware Alteon Application Manual page 240

Alteon Application Switch Operating System Application Guide
Server Load Balancing
2. Access and then enable URL path change.
>> Main# /cfg/slb/virt 1/service 80/http/urlchang
>> Enter enabled/disabled or clear [e|d|c] [d]: e
>> Enter hostname match type [sufx|prefx|eq|incl|any] [any]: eq
>> Enter hostname to match: www.a.com
>> Enter path match type [sufx|prefx|eq|incl|any] [any]: eq
>> Enter path to match: www.path.com
>> Enter page name to match or none []: test
>> Enter page type to match or none: html
>> Enter path action type [insert:replace:remove:none]:
3. Depending on the action type, enter the required parameters.
Table 24: URL In Server Responses Action Parameters
Action Action Parameters
None No action is taken.
Continue to the next step
Remove The matched path section is removed.
Continue to the next step
Insert The following path section is inserted.
>> Enter path to insert []:
>> Insert the specified path before or after the matched section?
[b/a]:
Replace The following path section is removed.
>> Enter new path to replace the matched section:
4. Enter the page name and path type to be used for the path change.
>> Enter new page name or none []: newpagename
>> Enter new page type or none []: html
Example
To change links in server responses with paths starting with "abcd" to start with "aaabcd", use the
following configuration:
240
Document ID: RDWR-ALOS-V2900_AG1302