Radware Alteon Application Manual page 473

— Define an IP interface.
— Define each real server.
— Assign servers to real server groups.
— Define virtual servers and services.
2. Turn on Layer 7 lookup for the filter.
>> # /cfg/slb/filt 1/adv/layer7/l7lkup ena
3. Enable header load balancing for the Host: header.
>> # /cfg/slb/layer7/redir/header ena host
4. Define the hostnames.
>> # /cfg/slb/layer7/slb/addstr ".com"
>> Server Load Balance Resource# add ".org"
>> Server Load Balance Resource# add ".net"
5. Apply and save your configuration changes.
6. Identify the string ID numbers with this command.
>> # /cfg/slb/layer7/slb/cur
Each defined string has an associated ID number:
ID SLB String
1
any
2
.com
3
.org
4
.net
7. Configure the real servers to handle the appropriate load balance strings.
8. Add the defined string IDs to the real servers, where ID is the identification number of the
defined string.
>> # /cfg/slb/real 2/layer7/addlb <ID>
Note: If you do not add a defined string (or add ID=1), the server will handle any request.
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
Table 43: SLB Strings
Application Redirection
473