Radware Alteon Application Manual page 478

Alteon Application Switch Operating System Application Guide
Application Redirection
2. Configure RTSP cache servers and the IP addresses.
>> # /cfg/slb/real 1
>> Real server 1# rip 1.1.1.1
>> Real server 1# ena
>> Real server 1# /cfg/slb/real 2
>> Real server 2# rip 1.1.1.2
>> Real server 2# ena
>> Real server 2# /cfg/slb/real 3
>> Real server 3# rip 1.1.1.3
>> Real server 3# ena
>> Real server 3# /cfg/slb/real 4
>> Real server 4# rip 1.1.1.4
>> Real server 4# ena
3. Define a group to load balance the RTSP cache servers.
>> # /cfg/slb/group 1
>> Real Server Group 1# add 1
>> Real Server Group 1# add 2
>> Real Server Group 1# add 3
>> Real Server Group 1# add 4
4. Configure a redirection filter.
>> # /cfg/slb/filter 100
>> Filter 100# action redir
>> Filter 100# proto tcp
>> Filter 100# dport rtsp
>> Filter 100# rport rtsp
>> Filter 100# group 1
>> Filter 100# adv/proxyadv
>> Filter 100# Advanced# proxy disable
5. Enable Layer 7 lookup for the redirection filter 100.
>> Filter 100 Advanced# layer7/l7lkup ena
6. Configure a default allow filter to facilitate traffic.
>> # /cfg/slb/filt 2048
>> Filter 2048# sip any
>> Filter 2048# dip any
478
(Configure RTSP Cache Server 1)
(Enable RTSP Cache Server 1)
(Configure RTSP Cache Server 2)
(Enable RTSP Cache Server 2)
(Configure RTSP Cache Server 3)
(Enable RTSP Cache Server 3)
(Configure RTSP Cache Server 4)
(Enable RTSP Cache Server 4)
(Add RTSP Cache Server 1 to Group 1)
(Add RTSP Cache Server 2 to Group 1)
(Add RTSP Cache Server 3 to Group 1)
(Add RTSP Cache Server 4 to Group 1)
(Select the menu for filter 100)
(Set the action for redirection)
(Enter TCP protocol)
(Enter service port for RTSP)
(Enter redirection port for RTSP)
(Select RTSP cache server group 1)
(Select the Advanced menu for filter
100)
(Disable proxy)
(Select a default allow filter 2048)
(From any source IP addresses)
(To any destination IP addresses)
Document ID: RDWR-ALOS-V2900_AG1302